AUTO10 Cleaning
Cleaning Hopper
Firstly, make sure the smart cap is closed. Hold the base with one hand and with the other hand, turn the handle in the opposite direction to unlock the hopper from the juicing bowl.
Under running water, unclip the lid by pushing the clip on the handle to lift off. Rinse under tap. Then rinse the hopper inside and out to remove any juice and pulp.
Wipers and Juice Strainer
Remove the Wiper, Strainer and Auger from the centre of the juicing bowl. Push the auger out of the strainer from the bottom and rinse under tap, using toothbrush to remove any pulp from the rim.
Twist the wiper off of the strainer and rinse under tap.
Cleaning Strainer
Grab your green cleaning tool and insert it into the strainer. Under running water, move the handle back and forth over the juice strainer until clean.
Remove the cleaning tool and use the toothbrush to remove any residue pulp.
Cleaning Bowl
Wash the bowl under running water, you can use soap if you choose. Unclip the pulp chute and clean underneath the bowl using your brush to remove any pulp. Remove the seal and rinse thoroughly before putting it all back together.
Note: There is a black silicone seal in the pulp chute that can be removed for cleaning. After rinsing, ensure it is fitted correctly back in place before clipping the chute back to bowl.
